One Stop Solution For Aluminum Profiles
调查
表单加载...
alumiuback

Aluminum Profiles/Aluminum Extrusions

What is Aluminum Profile?

The aluminum profile is also named aluminum extrusion. Extrusion is the process of pushing a heated aluminum billet through a die of the desired cross-section. The formed profile is lightweight, strong, and corrosion-resistant, and the shapes are just like the opening of the die. Generally, the die is made of indurative steel or cemented carbide. There are two kinds of conventional methods of extruding aluminum, direct extrusion (same as forwarding extrusion) and indirect extrusion (same as backward extrusion). And there are various ways of categorizing aluminum profiles. According to the aluminum material, the aluminum profile can be classified as 1100 aluminum profile, 6061 aluminum profile, and 6063 aluminum profile. According to different applications, it can be classified as an architectural aluminum profile, industrial aluminum profile, etc.

What is Aluminum Profile (1)e5t
What is Aluminum Profile (1)k9d

6061 Aluminum Channel

What is Aluminum Profile (2)3n9

T Slot Aluminum Extrusion

What is Aluminum Profile (3)gvj

6063-T5 Aluminum Heat Sink

What is Aluminum Profile (5)h9m

6061-T5 Aluminum Association I Beam

What is Aluminum Profile (6)3mb

T Slot Aluminum Extrusion For Mask Machine

Haixuan Aluminium Corporation has different extruding machines you can choose the most suitable extruder from 600 MN to 6500 MN, A full range of aluminum materials are available, From 1series-7series. Still, the most common alloy for extrusion includes 6061, 6063, 6005, 3003, 3102, 1100, 1050, and Temper T4-T6. Regarding surface treatment for aluminum extrusion, Haixuan gives you a varied selection which includes anodizing, powder coating, wood grain transfer printing, and so on. In addition, we provide customer precision machining services. In a word, we are able to provide you with a diverse range of aluminum profiles and fabrication services. You can have all your aluminum profiles at Haixuan.

Treatment of Aluminum Profiles

● Heat Treatment

● O/F/HXXX/TXXX  Temper

Surface Treatment of Aluminum Extrusions

● Powder coating

● Aluminium with stainless steel look

● Anodising(Clear & Stain & Hard coat)

● Chemical surface treatment

● Mechanical surface treatment

● Woodgrain transfer paper printing

● PVDF

● Brushed, Sandblasted, Polished

Typical Products of Aluminum Profiles

● Standard Aluminium Profile ((tube/pipe/bar/angle/corner, L, T, U)
● Custom Aluminium Extrusion (Tailored solutions)
● Aluminium Extruded Frame
● T-slot Aluminum Profile
● Aluminium Solar Panel Frame
● Extruded Aluminum Heat Sink
● Window & Door & Partition Extrusions
● General Aluminum Profile
● Blind & Louvre & Shutter Extrusions
● Aluminium Profile for Ceiling
● Full Aluminium Furniture
● Aluminium Extrusion Profile Accessories
● Assembly Line Aluminum Framework
● Ceiling Aluminium Profiles
● 6061-T6 Aluminum Association Channel
● 3003 Multi-Channel Aluminium Tube
● Aluminum Extrusions for Big-sized Applications
● 6061-T6 Aluminum Association I Beam
● 6063 Aluminium Profiles with Anodizing Treatment
● Extruded Aluminium Motor Enclosure
● Aluminum Motor Housing
● Aluminium Extrusion Profile Accessories
● Assembly Line Aluminium Framework
● Aluminium Bracket
● Aluminum Handrail
● Aluminium Workbench/Table
● Aluminium Ceiling System
● Aluminium Roll Up Stands

Benefits of Aluminum Profiles

Industrial aluminum profiles are profiles of aluminum shaped by the process of forcing it to flow through a shaped opening in a predesigned die. The extruded material emerges as an elongated piece with the same profile as the die opening. It is widely used in many industrial areas, it comes with the following benefits:

● Easy machining and fabrication

● Long life

● Excellent corrosion resistance

● Wide range of geometries possible

● Raw material cost is lower

● Eternal recyclable

● Good appearance, can be surface treated with different colors

● Good mechanical properties

How to choose the right alloy for extruded aluminum profiles?

HAIXUAN makes all the standard and custom aluminum alloys for extrusions. We can provide you with any tempers, shapes and sizes you wanted, by both direct extrusion and indirect extrusion. Both seamless and structured extrusions are available. If your demanded quantity exceeds 40 tons, we also have the ability to create a tailored alloy for you. Bellow table shows you a typical alloy for aluminum extrusions.

What is Aluminum Profile (7)fqm
Series Typical alloy Characteristics Applications
1XXX 1050/1070/1100/1197 Aluminium Alloy ● Pure aluminium
● Non-heat treatable alloy
● Soft
● Good thermal conductivity
● Heat transfer
● Automotive
● HVAC/R industries
● Electrical industry
3XXX 3102/3103/3003 Aluminium Alloy ● Good corrosion resistance
● Non-heat treatable alloy
● Moderate strength
● Good workability
● 3003 Alloy is 20% stronger than 1100
● Architectural application
● Gutters, downspouts, roofing, and siding
● Automotive
● HVAC/R industries
● Outdoor applications
● Other anti-rust application
5XXX 5083 Aluminium Alloy ● Easier to weld than 6xxx-series alloys
● Excellent in corrosion resistance in a salt-water environment
● Marine ship structure applications
6XXX 6061 Aluminium Alloy ● High corrosion resistance
● Heat treatable alloy
● Weldable
● Magnesium and silicon alloy
● Good weldability and formability.
● Construction material
● Automotive components
● Marine components.
● Bridge components
6063 Aluminium alloy ● Highly corrosion resistant
● Good workability and weldability
● Best appearance after anodizing
● Finer grain structure than 6061
● Railway car components
● Tube/Pipe
● Electrical bus conductors
● Architectural applications.
6082 Aluminium Alloy ● Highly corrosion resistant
● Good appearance after anodizing
● High-strength
● Trucks body
● Floors
7xxx 7075 Aluminium Alloy ● More zinc than 6061
● Excellent corrosion resistant
● High-strength
● High-strength applications
● Aerospace
● Military equipment
7108 Aluminium Alloy ● Excellent corrosion resistant
● High-strength
● Limited extrudability and formability
● Susceptible to stress corrosion in areas with high stresses
● Building and t

Design a New Die for Your Aluminum Profiles

A die is also called a tool or mold. It is made of super-hard tool steels, and the hardness ensures it is suitable for pressing aluminum material through inter opening. The process of pushing an aluminum billet through a steel die to make the final aluminum profile is called extrusion. It determines the shapes of the profile, which is why different tools are used for the production of different aluminum profiles. For example, when we are making solid profiles, we choose a solid die and choose the built-up tool for making the hollow section profile. For making a large-sized aluminum extrusion, we design a die with one opening, and if making a smaller profile, we will create the die with multi chambers. You may find the die is the core part used in the manufacturing of aluminum extrusion.

Our Aluminum Profile Machining Fabrication Capacity

At HaiXuan, we provide you with different possibilities for machining an aluminum profile.

Our CNC machining center for the milling, drilling, cutting, and sawing of aluminum profiles. And we manufacture various aluminum parts through the following machining processes:

● Cut to length

● Punching

● CNC machining

● Milling

● Drilling

● Bending

● Broaching

What is Aluminum Profile (8)iva

Select the appropriate aluminum profile, the following items you may consider

● Mechanical property

● The tolerance

● How to choose the right alloy (EN AW 6063 or 6061)

● The temper

● Dimensions

● What the surface treatment and surface quality

● The cost of fabrication

The Benefits of Aluminum

  • Aluminum-the metal of the future

    When you choose aluminum from Haixuan for your design,you will create a product that's strong,ligfuturistic metal.

  • Lightweight and Reduce Cost

    Aluminium is approximately 1/3 the weight of iron,steel,copper,or brass.This is an advantage in

  • Reduction in shipping and handling costs.

    1 cubic meter aluminium =2,700kg

    1 cubic meter steel=7,800kg

THE BENEFITS OF ALUMINUMmq9